Should you lay the driveway before fitting electric gates?
No. Put the gate's cables, ducting, posts and any track or motor boxes in first, then let your driveway company lay the surface up to them. Lay the drive first and part of it has to be dug up again to get the gate's groundworks in, which costs you more and rarely looks as good.
It's one of the questions we get asked most. A customer once put it to Keith like this: "I'm thinking of having my driveway installed before my electric gates." His answer hasn't changed. Like a lot of people before them, they were about to do it the wrong way round.
Why is laying the drive first a mistake?
An electric gate needs things under the ground before it can work. If a new drive is already down, the only way to get them there is to cut into it.
In Keith's words, having your driveway laid first "only means having part of it ripped out to enable structures to be laid", which in the end costs you more. And however careful everyone is, a patched drive rarely matches the rest. The finish isn't the one you pictured when you paid for it.
That's the cost and the disruption in one go: the gate job takes longer, the driveway company may need to come back, and you end up with a repair in a brand new surface.
What goes under the drive for an electric gate?
More than most people expect. Depending on the gate, the groundworks can include:
- A power supply run from the house or garage to the gate
- Ducting for the motor, photocell and access control cables
- Foundations for the posts, or for new pillars
- Underground motor boxes under each hinge, if you're having underground motors
- The running track for a tracked sliding gate, or the foundation for a cantilever
- Cabling out to a keypad or intercom post
All of it can sit underneath your drive. Done before the surface goes down, most of it ends up totally invisible or hardly noticeable. That's how we get the best finish.
What's the right order of work?
- Survey. We measure the opening and agree the gate, how it opens and where the motors, cables and access control will go.
- Gate groundworks. Our own team lays the cables, ducting, posts or track and anything else that sits under the surface.
- The driveway. Your driveway company block paves, lays resin, tarmacs or puts down whichever surface you've chosen, right up to what we've installed.
- The gate goes in. We hang the gate, connect the automation and access control, test it and hand over.
Keith's advice is the same now as it was then. If you're in this position, have your cables, structures or posts laid first, and then let your driveway company do the floor finish up to them. That way you get the drive you first pictured.
Do you work with my driveway company?
Yes. We liaise with driveway companies to make sure the order of work happens like this. We'll agree with them what goes in the ground, where and when, so nobody's digging up anybody else's work.
If you haven't booked the drive yet, tell us when you ask for a quote. It's far easier to plan both jobs together.
What if my drive is already laid?
Then it's not the end of the world. It just means more care on site. We'll plan the cable and duct runs to disturb as little of the surface as we can, and we'll be honest at the survey about what needs cutting.
Some gates need less groundwork than others. Swing gates with arm motors need less digging than underground motors, for example. If keeping the drive intact matters most, say so and we'll factor it into what we recommend.
Does it change the price?
Doing the gate groundworks before the drive goes down is usually the cheaper way round, because nothing has to be broken out and reinstated. For the gate itself, a 3m pair of electric swing gates from us starts at £6,610, fitted and including VAT. Our guide to what electric gates cost covers the rest, or you can see a price for your own opening with the instant quote.
Planning a new drive and gates together? Have a look at the electric gates and driveway gates we make, then give us a bell on 0113 414 1353 before the driveway company starts.
Driveway and gate questions
Should I install my driveway before or after electric gates?
After the gate's groundworks. Have the cables, ducting, posts and any track or motor boxes put in first, then let your driveway company lay the surface up to them. Laying the drive first means cutting part of it out again.
Will you work with my driveway company?
Yes. We liaise with driveway companies so the gate's groundworks go in before the surface, and we agree with them what goes in the ground, where and when.
Can you fit electric gates to a drive that's already laid?
Yes, it just takes more care. We plan the cable and duct runs to disturb as little of the surface as we can, and we will be honest at the survey about what needs cutting.